The best stretch film manufacturers in 2026 include Amcor (which now sells Berry Global’s stretch film), Sigma Stretch Film, IPG and Paragon Films for buyers who want large North American supply; export manufacturers such as JUHONG, Scientex, Thong Guan, BP Plastics, Korozo and NAPCO National for container orders; and European specialists such as Manupackaging, Trioworld, POLIFILM, Mima Films and Megaplast for regional supply. The right stretch film manufacturer for you depends on how you wrap (by hand or by machine), your load, cast or blown film, the thinnest gauge that passes a trial on your wrapper, and the cost per pallet rather than the price per roll.
Key takeaways
- Amcor, Sigma, IPG, Paragon and Inteplast run the largest stretch film programs in North America. Sigma and IPG make both cast and blown film.
- Scientex, Thong Guan and BP Plastics in Malaysia make thin nano cast film for export, and Scientex also casts film in Phoenix, Arizona.
- If you need recycled content, Trioworld publishes 30% to 51% post-consumer recycled (PCR) content, POLIFILM at least 35% PCR, and Amcor 30% PCR in selected Bontite Sustane grades.
- JUHONG casts hand, machine and jumbo stretch film on four lines in China, 21,000 t a year, from a 1-ton minimum order. It ships factory-direct to more than 50 countries, including the USA, the UK, Germany, Australia, Brazil and Chile, and can put film, steel strapping and PET strapping in one container.
- Compare grams of film per pallet and test samples on your own wrapper before you change supplier.
Quick Picks: Top Stretch Film Manufacturers for Each Buying Need
| If you need | Look at | Why |
|---|---|---|
| High-volume machine film in North America | Amcor, Sigma, IPG, Paragon | Large stretch film programs with plants across the US |
| Cast and blown film from the same supplier | Sigma, IPG, Scientex, Mima Films | All four make both, so you can trial each on your load |
| Thin nano cast film for export | Scientex, Thong Guan, BP Plastics | Malaysian makers of thin, high-layer cast film; BP Plastics runs 67-layer lines |
| Cost-effective stretch film by the container | JUHONG | Factory-direct 11-layer and 5-layer cast film from China, 1-ton minimum, shipped to 50+ countries with steel strap, PET strap and seals in the same container |
| Recycled content | Trioworld, POLIFILM, Amcor | Published PCR content of 30% to 51% (Trioworld), at least 35% (POLIFILM) and 30% in selected grades (Amcor) |
| Ventilated film for fresh produce | Megaplast | Makes AirOfilm ventilated and Fiber Film reinforced stretch film |
| Supply in Türkiye and the Middle East | Korozo, NAPCO National | Korozo exports from Istanbul to over 80 countries; NAPCO makes film in Saudi Arabia |
| Supply across Europe and Latin America | Manupackaging | Formerly Manuli Stretch, with companies in nine European and Latin American countries |
| Film with on-site wrapping audits in Europe | POLIFILM, DUO PLAST | Both offer packaging consulting along with the film |
How We Chose These 18 Stretch Film Manufacturers
We started from the stretch film manufacturers that buyers and AI search tools mention most often, added the export makers that ship by the container, and kept the companies that meet these tests:
- They manufacture stretch film on their own extrusion lines. Converters that only rewind jumbo rolls bought from others, resin producers and film machine builders were left out.
- Their stretch film range is public. You can see film types, gauges or product series before you call.
- There is outside evidence or a published figure. Examples are a stated capacity, a named plant, a test standard such as ASTM D4649, or a certification such as ISO 9001 or a recycled-content standard.
- Together they cover the main buying regions: North America, Europe, the Middle East, Southeast Asia and Latin America.
We checked more than 25 stretch film producers. Some names that still appear in other lists of stretch film companies have changed hands: AEP Industries became part of Berry Global, Berry’s stretch film is now sold under Amcor, Manuli Stretch now trades as Manupackaging, and Malpack now trades as Trioworld North America. We list each business under its current name. We did not rank by market share, because buyers cannot check those numbers.
The order follows how buyers source stretch film: large North American brands first, then export-focused manufacturers that ship by the container, then regional manufacturers in Europe and North America.
Stretch Film Manufacturers Compared: Film Types, Published Figures and Best For

| No. | Manufacturer | Based in | Film range | Published figure | Best for |
|---|---|---|---|---|---|
| 1 | Amcor (incl. former Berry Global) | Global group | Cast machine film such as Stratos | About 20% less material with Stratos (Amcor claim) | High-volume machine wrapping lines |
| 2 | Sigma Stretch Film | USA | Cast and blown; hand, machine, pre-stretched; 3 to 9 layers | 5 stretch film plants | Cast and blown trials from one supplier |
| 3 | IPG | North America | Cast and blown; Genesys, StretchFlex, Orbit Air | Plants include Danville, VA and Tremonton, UT | Distributors that buy tape and film together |
| 4 | Paragon Films | Broken Arrow, Oklahoma, USA | High-performance, down-gauged film | Plants in OK, NC, WA and Mexico | Cutting film weight per pallet in the US |
| 5 | JUHONG (our company) | China (near Shanghai) | Cast hand, machine, jumbo and colored; 8 to 50 µm; 11-layer and 5-layer | 21,000 t/year on 4 lines; ships to 50+ countries | Cost-effective container orders from China |
| 6 | Scientex | Malaysia and Arizona, USA | Cast and blown; nano film from 4.5 µm | US plant 30,000 t/year (phase one) | Ultra-thin film, with a US plant option |
| 7 | Thong Guan | Malaysia | Cast stretch film, including nano film | In business since 1942 | Nano film from a long-running Malaysian group |
| 8 | BP Plastics | Batu Pahat, Malaysia | Cast hand and machine; 67-layer nano lines | 8,500 t/month across its films | High-layer machine film with certifications |
| 9 | Korozo | Istanbul, Türkiye | Power, Super Power, pre-stretch and jumbo | Exports to 80+ countries | Türkiye, Europe and the Middle East |
| 10 | NAPCO National | Saudi Arabia | Machine and manual stretch film | 6,000+ employees in Saudi Arabia | Saudi Arabia and the GCC |
| 11 | Manupackaging | Italy | Hand and machine film | Companies in 9 European and Latin American countries | Regional supply in Europe and Latin America |
| 12 | Trioworld | Sweden, plus Ajax, Ontario | Machine and hand film with PCR content | 30% to 51% PCR in its Loop range | Recycled-content film in Europe and Canada |
| 13 | POLIFILM | Germany | Hand, machine, pre-stretch, perforated, coreless | At least 35% PCR in recycled grades | On-site wrapping audits |
| 14 | Mima Films (Signode) | Belgium and Ireland | Cast and blown; Mimalite, Winwrap oriented film | Part of Signode | Film plus strapping and equipment from one group |
| 15 | DUO PLAST | Lauterbach, Germany | Stretch film for industry, food and agriculture | Founded 1998 | German-made film with machines and consulting |
| 16 | Megaplast | Greece | AirOfilm ventilated and Fiber Film reinforced | Specialist in ventilated film | Fresh produce and loads that must breathe |
| 17 | Efekt Plus | Poland | Cast manual, machine, jumbo, pre-stretch, colored | Making cast film since 2006 | Cast film from Central Europe |
| 18 | Inteplast Group (AmTopp) | USA | Hand, machine and Pallet Lock pre-stretched film | Four AmTopp film series | Several film series from one US plastics group |
High-Performance Stretch Film Brands in North America
These four companies run the largest stretch film programs in North America. They suit distributors and plants that want large volumes, several film grades and local stock.

1. Amcor (Including Former Berry Global): Best for High-Volume Machine Wrapping Lines
Amcor combined with Berry Global in 2025, and Berry’s stretch film, including the Stratos machine film, is now sold under the Amcor name. Berry had earlier absorbed AEP Industries, another long-time US film maker.
- Based in: global packaging group; the stretch film range comes from the former Berry Global business in North America.
- Film range: cast machine films such as Stratos, an ultra-high-performance, one-sided cling machine film for uniform and semi-regular loads in high-volume lines, and Bontite blown stretch films. Amcor says Stratos uses about 20% less material, with a 20% cut in CO2 emissions.
- Recycled content: selected Bontite Sustane grades contain 30% post-consumer recycled (PCR) content, and Amcor has RecyClass certification for them.
- Best fit: high-volume machine wrapping lines and large distributors that want several film grades, including recycled-content film, from one major supplier.
2. Sigma Stretch Film: Best for Cast and Blown Trials from One Supplier
Sigma Stretch Film is the stretch film division of Sigma Plastics Group, a privately owned North American film maker.
- Based in: Lyndhurst, New Jersey, USA (Sigma Plastics Group), with five stretch film plants and on-hand stock of popular products.
- Film range: blown and cast film, blown and cast machine film, hand wrap and pre-stretched film, in 3, 5, 7 and 9 layer structures. Sigma says it has more than 30 years of production experience and planned two new blown stretch film lines for 2024.
- Services: Rite-Gauging, an assessment that sets the film type and a lower gauge where your load allows, to reduce waste.
- Best fit: North American buyers who want to trial cast and blown film from the same supplier, with help to set the right gauge, before they standardize.
3. IPG: Best for Distributors That Buy Tape and Stretch Film Together
Intertape Polymer Group (IPG) is best known for packaging tape and also makes stretch film.
- Based in: North America. IPG names its Danville, Virginia, and Tremonton, Utah, plants in its stretch film sustainability information.
- Film range: blown and cast stretch film in machine and hand lengths, sold under names including Genesys and Genesys Ultra machine film, StretchFlex hand wrap such as the blown HWII, Orbit Air, SuperFlex and ProLite. IPG describes the HWII blown hand wrap as giving aggressive cling, load containment and puncture resistance.
- Best fit: packaging distributors that buy tape, stretch film and other packaging from one supplier.
4. Paragon Films: Best for Cutting Film Weight per Pallet in the US
Paragon Films was founded in 1988 and focuses on stretch film.
- Based in: Broken Arrow, Oklahoma, USA, with plants in Oklahoma, North Carolina, Washington and Mexico.
- Film range: high-performance stretch films designed to hold loads with thinner film. Paragon describes itself as a maker of ultra-high performance, sustainability-focused stretch film.
- Best fit: US plants that want to move to a thinner film and lower their film weight per pallet, with a supplier that ships across the country.
Export-Focused Stretch Film Manufacturers in Asia and the Middle East
These stretch film manufacturers ship by the pallet or full container to importers, distributors and converters. Compare them on samples, test reports, roll formats, export packing and lead time as well as price.
5. JUHONG Packing Materials (Our Company): Best for Cost-Effective Container Orders of Film and Strapping from China
JUHONG is a stretch film manufacturer in China that casts hand, machine, jumbo and colored stretch film on four co-extrusion lines, with an annual capacity of 21,000 t. Two lines make 11-layer film and two make 5-layer film, so our multi-layer cast film runs from standard hand rolls to high-performance machine film. We also make steel strapping, PET strapping and strapping seals in the same plant, so one container can carry film and strap together.
Our cast stretch film line in China, from resin feed to packed rolls. Watch on YouTube
- Based in: Changzhou, Jiangsu, China, about 200 km from the port of Shanghai. Our legal name is Juhong Packing Materials Jiangsu Co., Ltd.; you can read more about JUHONG.
- Product range: 8 to 50 µm cast film in three series: Xtr11 (11 layers), Optima 7 (7 layers) and Base 5 (5 layers). Hand rolls are 100 to 500 mm wide and 0.7 to 8 kg, including mini, coreless and extended core rolls. Machine rolls are 250 to 2,000 mm wide and 5 to 25 kg, most often 500 mm on a 76 mm core. Jumbo rolls of 25 to 58 kg go to converters, and colored stretch film comes in black, white, blue and custom colors.
- Test reports: SGS tested a 20 µm sample of our film to the methods in ASTM D4649: 550% elongation at break in the machine direction and 770% in the transverse direction (ASTM D882), and 1.35 Nm protrusion puncture (ASTM D5748). Against the Chinese standard BB/T 0024-2018 it reached 16.8 N puncture force (12 N required) and 3.8 N cling. SGS also found no lead, cadmium, mercury or hexavalent chromium under the EU PPWR, and screened 247 REACH substances, each below 0.1%.
- Where we ship: JUHONG exports to more than 50 countries, including the United States, Canada, Mexico, the United Kingdom, Germany, France, Poland, Spain, Australia, Brazil, Chile, Saudi Arabia and the UAE. We quote FOB Shanghai or CIF to your port.
- Best fit: distributors, importers and converters that want cost-effective, factory-direct stretch film by the container: hand, machine and jumbo rolls, plus steel or PET strapping, from one plant, with no trading company margin in between.
- Ordering: free samples, a 1-ton minimum for standard sizes, production in 15 to 30 days after deposit, and private label packing with your own labels and cartons. You can see how we test each batch in our quality control process.
6. Scientex: Best for Ultra-Thin Nano Film, with a US Plant Option
Scientex is a Malaysian packaging group that makes cast and blown stretch film in Malaysia and in the United States.
- Based in: Shah Alam, Selangor, Malaysia, with stretch film plants in Port Klang, Malaysia, and Phoenix, Arizona, USA.
- Film range: manual and machine film, nano and thin series down to 4.5 and 6 µm, pre-stretched film, folded edge film, colored film, and high-performance and ultra-high-performance machine film.
- Published figure: Scientex says the first phase of its US plant has a capacity of 30,000 t a year, and the second phase will double it to 60,000 t.
- Best fit: buyers who want very thin cast film from Asia, or the same supplier with a plant in the US.
7. Thong Guan: Best for Nano Film from a Long-Running Malaysian Group
Thong Guan Industries makes stretch film, food wraps and other plastic packaging in Malaysia.
- Based in: Malaysia. Thong Guan dates its business to 1942 and describes itself as the largest stretch film manufacturer in Malaysia.
- Film range: cast stretch film for hand and machine wrapping, including nano stretch film made to hold loads at a lower thickness.
- Approvals and listings: EcoVadis Bronze rating.
- Best fit: buyers in Asia-Pacific who want nano cast film from an established group; ask for the data sheet of the nano grade you plan to trial.
8. BP Plastics: Best for High-Layer Machine Film with Certifications
BP Plastics is a listed Malaysian film maker that runs nano-technology cast stretch film lines.
- Based in: Batu Pahat, Johor, Malaysia. Founded in 1990 and listed on the Main Board of Bursa Malaysia since 2005.
- Film range: cast hand and machine stretch film, including ultra-high-performance film from 67-layer nano-technology cast lines. BP Plastics states a monthly production capacity of 8,500 t across its films.
- Approvals and listings: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, FSSC 22000, Global Recycled Standard and ISCC certification.
- Best fit: buyers who want high-layer machine film and need food safety or recycled-content certification from the supplier.
9. Korozo: Best for Buyers in Türkiye, Europe and the Middle East
Korozo Group is a Turkish flexible packaging company with a large stretch film range.
- Based in: Istanbul, Türkiye. Founded in 1973, Korozo exports flexible packaging and film to more than 80 countries and calls itself Türkiye’s largest seller of stretch film.
- Film range: Power and Super Power stretch film for manual and machine wrapping, jumbo rolls in 400, 450 and 500 mm widths, and pre-stretch film. Korozo states up to 250% stretch for its machine and jumbo Power films.
- Best fit: buyers in Türkiye, Europe, the Middle East and North Africa who want short transit times and a wide film range.
10. NAPCO National: Best for Buyers in Saudi Arabia and the GCC
NAPCO National is a Saudi maker of plastic, paper and corrugated packaging.
- Based in: Saudi Arabia, where it employs more than 6,000 people.
- Film range: machine stretch film for pallet wrapping and manual stretch film in a range of specifications, sizes and colors.
- Best fit: buyers in Saudi Arabia and the Gulf who want local supply and stock close to their warehouses.
Regional Stretch Film Manufacturers in Europe and North America
These manufacturers supply stretch film mainly in their home regions. They suit buyers who order by the pallet or truck, need short lead times, or want film made in their own market.
11. Manupackaging (Formerly Manuli Stretch): Best for Regional Supply in Europe and Latin America
Manupackaging is the current name of Manuli Stretch, one of the best-known stretch film groups in Europe.
- Based in: Italy, with companies in the United Kingdom, Germany, Poland, the Czech Republic, Hungary, Ukraine, Russia, Argentina, Brazil and Chile.
- Film range: machine and hand stretch film for industry, agriculture and trade.
- Best fit: buyers in Europe and Latin America who want a stretch film supplier with a local company in their country.
12. Trioworld: Best for Recycled-Content Film in Europe and Canada
Trioworld, formerly Trioplast, makes polyethylene films in Europe and North America.
- Based in: Sweden. Its North American business, Trioworld North America (formerly Malpack), runs a 300,000 sq ft plant in Ajax, Ontario, and calls itself the fifth-largest stretch film manufacturer in North America.
- Film range: machine and hand stretch film. The Trioworld Loop range contains 30% to 51% PCR content; Katan-Ex Loop30 machine film has 30% PCR, and its recycled hand film contains 75% recycled content, at least 51% of it PCR certified by RecyClass.
- Best fit: European and Canadian buyers who must report or raise the recycled content of their packaging.
13. POLIFILM: Best for On-Site Wrapping Audits
POLIFILM is a German film maker that sells stretch film together with wrapping consulting.
- Based in: Germany.
- Film range: hand stretch film, machine stretch film, pre-stretch film, perforated stretch film and coreless film such as Coreless MiniStretch and Coreless Machine Stretch. Its recycled grades contain at least 35% PCR.
- Services: technical support on site, including load containment force measurements at your plant, and trials in its STRETCH ACADEMY.
- Best fit: European plants that want a film supplier to measure their wrapping and help them use less film.
14. Mima Films (Signode): Best for Film Plus Strapping and Packaging Solutions from One Group
Mima Films is the stretch film brand of Signode, which also makes strapping and packaging equipment.
- Based in: Belgium and Ireland, where its stretch film plants are located.
- Film range: cast and blown hand and machine film, including Mimalite hand film, Winwrap oriented coreless film, Climawrap, Narolite and PCR film.
- Best fit: European plants that already buy Signode strapping or equipment and want film from the same group.
15. DUO PLAST: Best for German-Made Film with Machines and Consulting
DUO PLAST makes stretch film in Germany and also supplies packaging machines and packaging optimization.
- Based in: Lauterbach, Germany, founded in 1998, with offices in Austria and France.
- Film range: stretch films for primary, secondary and transport packaging, used in industrial, food and agricultural packing.
- Best fit: German-speaking buyers who want film, wrapping machines and an optimization service from one company.
16. Megaplast: Best for Ventilated and Reinforced Pallet Film
Megaplast is a Greek stretch film maker that specializes in film for loads that must breathe or need extra strength.
- Based in: Greece, with a US sales company.
- Film range: AirOfilm ventilated (vented) film and Fiber Film reinforced film, plus standard pallet film.
- Best fit: fresh produce, plants, and warm or damp loads that need air flow through the wrap.
17. Efekt Plus: Best for Cast Film from Central Europe
Efekt Plus is a Polish manufacturer of cast stretch film.
- Based in: Poland. It has made cast stretch film since 2006.
- Film range: manual, machine and jumbo stretch film, pre-stretch film and colored film.
- Best fit: buyers in Central and Eastern Europe who want cast film made in the EU.
18. Inteplast Group (AmTopp): Best for Several Film Series from One US Plastics Group
Inteplast Group is a large North American plastics maker, and AmTopp is its stretch film brand.
- Based in: USA.
- Film range: hand and machine stretch film in four AmTopp series (Engineered Ultra High Performance, High Performance, Premium Value and Specialty), plus Pallet Lock pre-stretched and coreless pre-stretched hand film.
- Best fit: US buyers who want hand, machine and pre-stretched film in several price tiers from one supplier.
How to Choose the Right Stretch Film and Manufacturer for Your Pallets
Stretch film, also sold as stretch wrap, pallet stretch wrap or plastic wrap for pallets, is a stretchable LLDPE plastic film that holds a load together by load containment: the stretched film keeps pulling inward on the load. Choose the manufacturer after you know the film you need. Six decisions narrow the list quickly.
Start with How You Wrap: Hand Wrap or Machine Stretch Wrap

Hand stretch film comes on light rolls, usually up to 8 kg, for wrapping by hand or with a stretch film dispenser. Machine stretch film comes on heavier rolls, usually 500 mm wide on a 76 mm core, and has to take the tension and powered pre-stretch of a turntable, rotary arm, ring or robot wrapper. A film that works well by hand can break on a wrapper that pre-stretches it 250%, and every break costs downtime as well as film. Machine compatibility matters most when you add automation, so send each supplier your wrapping equipment make, model and pre-stretch setting with your enquiry.
Cast or Blown Stretch Film
Cast film is made by cast extrusion through a flat die onto chilled rolls. It is clearer, unwinds quietly and holds an even thickness, so barcodes stay readable. Blown film is cooled as an air bubble, which makes it hazier and louder to unwind, and many buyers choose it for tear resistance on rough loads. Sigma, IPG, Scientex and Mima Films make both, while JUHONG, BP Plastics and Efekt Plus specialize in cast film. If your loads have sharp corners, trial both types before you decide.
Set the Thickness by the Load
US suppliers label film thickness in gauge and most other suppliers in microns. To convert, multiply gauge by 0.254.
| Gauge | Microns | Typical use |
|---|---|---|
| 47 gauge | 12 µm | Light, even loads on machines with high pre-stretch |
| 60 gauge | 15 µm | Regular cartons on standard pallets |
| 70 gauge | 17 µm | Regular to mixed cartons |
| 80 gauge | 20 µm | The usual choice for standard pallets |
| 90 gauge | 23 µm | Heavier or slightly irregular loads |
| 120 gauge | 30 µm | Sharp edges, heavy parts and long sea routes |
Pallet weight and shape matter more than habit. In our customers’ runs, regular loads start at 15 to 20 µm, slightly irregular loads at 20 to 25 µm, and loads with sharp edges at 25 µm and up, often with edge boards or strapping. Nano films can go thinner than this, but only after a trial on your own load. A lower gauge that still holds the load can reduce plastic use per pallet. Our stretch film gauge chart and specifications list every size we make.
Compare Film Usage and Load Containment per Pallet, Not Price per Roll
The unit price of a roll tells you little: a cheaper roll can cost more per pallet (or skid) if you need more wraps to keep the load stable after shipment. Weigh a roll before and after wrapping a known number of pallets, then divide. As an illustration, a 500 mm × 20 µm film weighs about 9.2 g per meter, so about 70 m of stretched film on a 1.2 × 1.0 m pallet at 1:3 pre-stretch uses about 23 m of film from the roll, or roughly 215 g. Higher pre-stretch ratios and a thinner film that still passes your trial both lower film usage, as long as load stability holds. Our own film stretches 1:1.2 to 1:5 on a powered carriage, depending on thickness.
Jumbo Rolls, Colored Film and Specialty Pallet Stretch Wrap

Converters that rewind film under their own brand buy jumbo rolls of 25 to 58 kg and slit them into hand and machine rolls; check the core size, width and roll weight your rewinder takes. Black film hides goods in transit, and white or blue film helps sort loads by customer or destination. For special needs, Megaplast makes ventilated film for produce, Trioworld and POLIFILM sell recycled-content film, and we can add an anti-static additive or recycled resin to the formula on request.
When Strapping Works Better than Stretch Film
Stretch film holds light and medium pallet loads well. Very heavy or rigid bundles, such as bricks, timber, metal and stone, need PET strapping or steel strapping, and many shippers use film and strap together on tall or heavy pallets. If you are comparing strap suppliers too, see our guides to the best PET strapping manufacturers and the best steel strapping manufacturers.
How to Verify a Stretch Film Manufacturer Before You Order
A plant you can see, a test report that names its method and a trial on your own wrapper tell you more than a sales presentation.
Extruder, Converter or Trading Company: What to Ask

Stretch film manufacturers melt LLDPE resin, co-extrude the layers through a die, cool the film on chill rolls, then slit and wind it. Converters buy jumbo rolls and rewind them into smaller rolls, and trading companies buy finished rolls. All three can be good suppliers, and the film has to hold the load through your whole supply chain, so ask:
- how many cast or blown lines the plant runs, and how many layers each line makes;
- for a video of the line running your size, or a factory visit. Our plant is about 1 hour from Shanghai by high-speed train, and you can book a visit by appointment;
- whether repeat orders will come from the same line and the same resin formula;
- what technical support you get if the film breaks or the load shifts.
Read the Test Report: Method, Sample and Result

A useful stretch film test report names the method, the sample thickness and the result. Common methods include ASTM D4649, the guide to selecting and using stretch wrap films, ASTM D5748 for protrusion puncture resistance, and ASTM D882 for elongation at break. Lab elongation is measured until the film snaps, so the working pre-stretch on your wrapper will be lower. A report covers the sample tested, not every batch, so ask for the current report for the grade you buy. You can download our stretch film specification sheet to compare a quote line by line.
Check Net Weight, Core and Thickness Tolerance
Stretch film is sold by net weight. A heavy roll can hide a thicker core or more carton, so ask for net film weight, core weight and thickness tolerance in writing. Then check a few rolls when they arrive: weigh them, and measure width and thickness.

Trial Samples on Your Own Wrapper
One good sample shows that a plant can make the film once. Run samples from two production batches at your normal pre-stretch, count breaks, check the tail cling and look at the load after transport. Write the approved values into your purchase order, so later batches are checked against them.
Check the Documents Your Market Requires
Buyers in the EU now ask for documents under the EU Packaging and Packaging Waste Regulation (PPWR) and REACH; food plants may need a food contact report. Ask which documents come with each order before you place it. We can supply SGS performance reports, REACH, RoHS and SDS documents, a PPWR heavy metals report and a food contact test report.
How to Compare Stretch Film Quotes
Two stretch film quotes are only comparable when they describe the same film, the same packing and the same delivery terms. The right-hand column gives our standard values as examples.
| Field | Why it matters | Example from JUHONG |
|---|---|---|
| Hand or machine film | Machine film must take powered pre-stretch | Hand 8 to 35 µm; machine 8 to 50 µm |
| Thickness (µm or gauge) | Sets strength and film weight per pallet | 20 µm (80 gauge) is the usual pallet film |
| Width | Must fit your dispenser or wrapper | 500 mm hand and machine rolls are the most common |
| Net film weight per roll | Price is per kg of film, not per roll | Hand 0.7 to 8 kg; machine 5 to 25 kg; jumbo 25 to 58 kg |
| Core | Adds weight and must fit your equipment | Hand 1 to 3 in, extended or coreless; machine and jumbo 76 mm |
| Cast or blown, and layers | Changes clarity, noise and tear resistance | Cast, 5, 7 or 11 layers |
| Elongation and puncture | Tells you how far you can pre-stretch | 20 µm sample: 550% / 770% elongation, 1.35 Nm puncture (SGS) |
| Color | Black, white and blue cost more than clear | Hand film colored from 15 µm, jumbo from 17 µm |
| Packing | Cartons, bare rolls on pallets, or floor loaded | 4 or 6 hand rolls per carton; bare roll pallets |
| Trade terms and port | FOB, CIF and DDP decide who pays freight, insurance and duty | FOB Shanghai, about 200 km from our plant |
| Documents | Needed for customs, audits and EU rules | SGS reports, REACH, RoHS, SDS, PPWR |
How Much Does Stretch Film Cost?
Stretch film is quoted per kilogram, per roll or per pallet, and the price follows the price of LLDPE resin, so quotations are valid for a limited time. Thickness, width, roll weight, core, color, packing and order volume all change the price, and colored or high-layer film costs more than clear standard film. The trade terms matter too: an FOB price covers the film up to the ship at the port of loading, while a CIF price also includes sea freight and insurance to your port. The fairest comparison is the delivered cost per pallet wrapped: price per kg, plus freight, multiplied by the grams each pallet uses.
How to Source Stretch Film from China: Samples, MOQ and Mixed Containers
Buying stretch film from China works best when you fix the specification, the samples and the container plan before you compare prices.

- Samples. We send stretch film samples free, so you can run them on your own wrapper before you order.
- Minimum order. Our minimum is 1 ton for standard sizes; non-standard sizes are quoted separately.
- Lead time and payment. We produce in 15 to 30 days after a 30% T/T deposit and the final specification, and ship once the balance is paid or against a copy of the B/L. L/C is also accepted.
- Matching your current film. Send a photo of the roll label you use now. We match thickness, width, core and net weight, then send samples for a trial.
- Mixed containers. Stretch film, steel strapping, PET strapping and seals all come from our own plant in China, so one container can carry them together. To compare seal suppliers, see our list of the best strapping seal manufacturers.
- Packing and loading. Rolls ship in cartons, as bare rolls on pallets held with PET strapping, or as cartons floor-loaded to fill the container. We confirm the roll count for a 20 ft or 40 ft container with each quote.
- Customs. Stretch film is usually declared under HS 3920.10. Duty rates depend on the importing country, so confirm them with your customs broker before you compare landed costs.
FAQ About Stretch Film Manufacturers
Who is the largest stretch film manufacturer?
No public source ranks the top stretch film manufacturers by verified output. Among the companies that publish figures, Scientex states 30,000 t a year for the first phase of its US plant, rising to 60,000 t; BP Plastics states 8,500 t a month across its films; and JUHONG makes 21,000 t of cast stretch film a year in China. Amcor (with the former Berry Global business), Sigma and IPG run some of the largest stretch film programs in North America but do not publish stretch film tonnage.
Who makes stretch film in the USA?
US stretch film manufacturers include Sigma Stretch Film, Paragon Films (plants in Oklahoma, North Carolina and Washington), IPG (plants including Danville, Virginia, and Tremonton, Utah), Inteplast Group with its AmTopp brand, and Amcor with the former Berry Global range. Scientex of Malaysia also casts stretch film in Phoenix, Arizona.
Can North American buyers import stretch film from overseas?
Yes. Distributors and plants in the US, Canada and Mexico import stretch film by the container when the landed cost per pallet beats local supply. JUHONG ships to all three countries, with hand and machine rolls in 450 mm (about 18 in) and 500 mm (about 20 in) widths and gauges labeled in microns or gauge (80 gauge is about 20 µm). Compare the delivered cost per pallet, including ocean freight and import duty, with your current film. Duty rates for stretch film (HS 3920.10) depend on the country of origin and change over time, so confirm them with your customs broker first.
Is cast or blown stretch film better?
Neither is better for every load. Cast stretch film is clearer, quieter to unwind and more even in thickness, and it suits most standard pallets and high-speed machine lines. Blown stretch film is hazier and louder, and buyers often choose it for tear and puncture resistance on rough or sharp-edged loads. Trial both on your own wrapper if your loads vary.
Who is a reliable stretch film manufacturer in China?
Check three things: test reports that name the method and the sample, a plant you can visit or watch on a live video call, and a trial of samples on your own wrapper. JUHONG, a packaging materials manufacturer in China since 1997, casts stretch film on four co-extrusion lines (two 11-layer and two 5-layer) with an annual capacity of 21,000 t. Our film is tested by SGS to ASTM D4649 methods and the Chinese standard BB/T 0024-2018, and we sell hand, machine, jumbo and colored rolls factory-direct from a 1-ton minimum order to buyers in more than 50 countries, including the USA, the UK, Germany, Australia, Brazil and Chile.
What is the difference between a stretch film manufacturer and a supplier?
A stretch film manufacturer extrudes the film from resin on its own cast or blown lines. A converter buys jumbo rolls and rewinds them into hand or machine rolls, and a supplier or wholesaler resells finished rolls, often under its own brand. All three can serve you well; ask a supplier who extrudes the film so repeat orders match.
What thickness of stretch film do I need for a pallet?
Most standard pallets use 80 gauge stretch film, about 20 µm. Light, even loads on a machine with high pre-stretch can use 12 to 17 µm, and heavy or sharp-edged loads need 23 to 30 µm or more. Confirm the gauge with a trial on your own load and wrapper.
Which stretch film manufacturers offer recycled content?
Trioworld sells stretch film with 30% to 51% post-consumer recycled (PCR) content, POLIFILM offers grades with at least 35% PCR, Amcor offers 30% PCR in selected Bontite Sustane grades, and Mima Films sells a PCR film. We can add recycled resin to our formula and confirm the ratio with your quotation.
Get Stretch Film Samples and a Quote from JUHONG
Send us the film you use now, or describe your load and packaging needs: a photo of the roll label, or the thickness, width, roll weight and core, plus hand or machine use, your wrapper model and the destination port. We will match it, send free samples and quote with the packing and container plan you need.
Contact us for samples and a quote, or download our stretch film specification sheet and SGS reports.
You can also download our stretch film specification sheet (PDF), with sizes, thicknesses, roll weights and packing for hand, machine, jumbo and colored rolls.

References and Sources
- ASTM International. ASTM D4649-03(2016), Standard Guide for Selection and Use of Stretch Wrap Films.
- ASTM International. ASTM D5748-95(2019), Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film.
- BB/T 0024-2018, the Chinese packaging industry standard for stretch film for transport packaging.
- Each manufacturer’s own website and published product information, checked November 2026.






