Steel Strapping · Hot-Dip Galvanized & Waxed

Galvanized Steel Strapping: Hot-Dip Zinc Coated & Waxed for Outdoor and Sea Freight Loads

JUHONG makes galvanized steel strapping in Changzhou, China, and has made steel strap since 1997. We slit it from hot-dip galvanized steel and then wax it, and every size and grade on our spec sheet can be supplied this way, from regular duty to high tensile. Choose it when the strapped load will stand outdoors or near the coast, or spend weeks at sea. Distributors, importers and manufacturers buy it by the container, together with the seals and tools that fit it.

Ribbon wound and oscillated wound coils of hot-dip galvanized steel strapping on wooden pallets
Ribbon · Oscillated · Jumbo
Coil formats for hand, pneumatic and automatic tools
650–1,000MPa
Tensile strength, regular duty to high tensile
GB/T · EN · AAR
SGS-tested to GB/T 25820 & EN 13246 · AAR-listed maker, ID 124 · ASTM D3953 testing on request

Trusted by Global Industrial Buyers

Hot-Dip Galvanized

What Is Galvanized Steel Strapping (Zinc Coated Steel Banding)?

Galvanized steel strapping is cold rolled steel strap with a zinc coating. We start from hot-dip galvanized steel coil, where a molten zinc bath has bonded a zinc layer to the steel, slit it to strap width, smooth the edges and add a coat of wax. Buyers also call it zinc coated steel strapping, galvanized steel strap or galvanized steel banding, and in the UK it is spelled galvanised. It is packaging strap for bundling and unitizing loads, a different product from the punched galvanized hanger strap sold for plumbing and building work.

How the Zinc Coating Protects the Strap

Zinc protects steel in two ways. The coating keeps moisture and air off the steel, and because zinc is more reactive than steel, it corrodes first. Where the strap gets a small scratch in a tool or seal, the zinc around it keeps protecting the exposed steel, so galvanized strap lasts far longer outdoors than painted or blue strap. Our hot-dip galvanized strap is slit from galvanized coil, so the zinc covers both faces and the slit edges are protected by the wax. The wax also lubricates the strap, so it slides and tensions smoothly in friction-type tensioners, and it gives the zinc a little extra protection in storage.

Galvanized · ribbon wound
Galvanized · oscillated wound
Galvanized · jumbo coil
Galvanized · zinc finish close-up
Ribbon wound
Oscillated
Jumbo
Close-up
Compare Finishes

Product Finish Compared: Galvanized vs Black Painted vs Blue Tempered Steel Strapping

Our steel strapping products come in three finishes that cover most export and domestic orders. They differ in durability and cost, so choose by storage time, climate and shipping route.

Finish
Containers & humid storage
Months outdoors or on the coast
Relative cost

Galvanized (hot-dip zinc coated) & waxed

Zinc on both faces, plus wax
Containers & humid storageYes
Months outdoors or on the coastYes
Relative costHighest
Paint on both faces and edges, plus wax
Containers & humid storageYes
Months outdoors or on the coastModerate
Relative costMedium
Thin oxide layer from heat treatment, plus wax
Containers & humid storageNo
Months outdoors or on the coastNo
Relative costLowest

Hot-Dip vs Cold Galvanized (Zinc Coated) Steel Strapping

Galvanized strap is made in two ways, and suppliers use the names loosely. Hot-dip galvanized strap is slit from steel coil that has run through a molten zinc bath, so the zinc is a metal layer bonded to the steel. It shows zinc spangle, the crystal pattern that forms as the zinc cools, and covers both faces, while the slit edges are protected by wax. This is ASTM D3953 Finish B and our standard galvanized steel strapping.

Cold galvanizing is a general name for zinc applied without a molten bath, such as electro-galvanizing or a zinc-rich coating. Our cold galvanized strap is slit first and then coated with zinc and waxed on our coating line, the same way we paint black strap, so all four sides are covered and the surface is smooth, with no spangle. Much of the strap sold as “zinc coated” in North America is this kind, a zinc-enriched coating that ASTM D3953 calls Finish C. When you compare prices between suppliers, ask which one you are being quoted. We make cold galvanized strap on request: contact us with your size and quantity.

Hot-dip galvanizedCold galvanized
How it is madeSlit from hot-dip galvanized coil, then waxedSlit first, then coated with zinc and waxed
Zinc onBoth facesAll four sides: both faces and both edges
EdgesProtected by waxZinc coated
SurfaceZinc spangleSmooth gray, no spangle
ASTM D3953Finish BFinish C (zinc-rich coating)
Choose it forLong outdoor storage, coastal yards and sea freight (our standard)Zinc on the edges too, or matching a zinc coated strap you already buy (on request, contact us)
Cold galvanized coils: zinc on the faces and edges, no spangle

When Galvanized Strap Is Worth the Higher Cost

Galvanized strap has the highest price of our three finishes, so use it where the extra corrosion resistance pays for itself:

  • Loads stored outdoors for months, such as lumber, bricks, pavers and steel pipe in open yards.
  • Coastal ports and humid climates, where salt air attacks painted strap.
  • Long sea voyages and open-top railcars or flatbed trucks, where the strap is exposed in transit.
  • Products where you need to prevent rust stains from the strap, such as galvanized pipe, galvanized coils, lumber and finished building materials.

For loads that stay in a container and then go indoors, black painted steel strapping is usually enough and costs less.

Galvanized or Stainless Steel Strapping?

Stainless steel strapping resists corrosion better still, but it costs much more and is used where chemicals, constant salt spray or hygiene requirements make zinc unsuitable. For bundling and palletizing heavy loads that are stored outdoors, galvanized steel strapping gives most buyers the protection they need at a far lower price.

Sizes & Grades

Galvanized Steel Strapping Sizes: Width, Thickness, Tensile Grade & Break Strength

Every size and grade below can be hot-dip galvanized and waxed, from 1/2 in to 2 in wide and 0.015 in to 0.047 in thick, including common sizes such as 3/4 in x 0.031 in and 1-1/4 in x 0.035 in or 0.044 in zinc coated steel banding. Break strength depends on width, thickness and tensile class.

Break Strength by Size and Tensile Class

Swipe sideways to see every grade →

WidthThicknessTerra650 N/mm²Ridge750 N/mm²Pivot830 N/mm²Duro930 N/mm²Nexa980 N/mm²Length / WeightCoil Winding
1/2 in12.7 mm0.015 in0.38 mm706 lbs3,137 N————39.2 ft/lb26.5 m/kgM/R
1/2 in12.7 mm0.020 in0.51 mm947 lbs4,210 N1,093 lbs4,858 N1,209 lbs5,376 N1,355 lbs6,024 N1,428 lbs6,347 N29.4 ft/lb19.8 m/kgM/R/O/J
1/2 in12.7 mm0.023 in0.58 mm1,077 lbs4,788 N1,243 lbs5,525 N1,375 lbs6,114 N1,541 lbs6,850 N1,624 lbs7,219 N25.6 ft/lb17.2 m/kgM/R/O/J
5/8 in16 mm0.015 in0.38 mm889 lbs3,952 N————29.6 ft/lb20.0 m/kgM/R
5/8 in16 mm0.020 in0.51 mm1,193 lbs5,304 N1,377 lbs6,120 N1,524 lbs6,773 N1,707 lbs7,589 N1,799 lbs7,997 N23.6 ft/lb15.9 m/kgM/R/O/J
5/8 in16 mm0.023 in0.58 mm1,357 lbs6,032 N1,566 lbs6,960 N1,733 lbs7,702 N1,941 lbs8,630 N2,046 lbs9,094 N20.5 ft/lb13.8 m/kgM/R/O/J
3/4 in19 mm0.020 in0.51 mm1,417 lbs6,299 N1,635 lbs7,268 N1,809 lbs8,043 N2,027 lbs9,012 N2,136 lbs9,496 N19.6 ft/lb13.2 m/kgM/R/O/J
3/4 in19 mm0.023 in0.58 mm1,611 lbs7,163 N1,859 lbs8,265 N2,058 lbs9,147 N2,306 lbs10,249 N2,429 lbs10,800 N17.1 ft/lb11.5 m/kgM/R/O/J
3/4 in19 mm0.028 in0.71 mm1,973 lbs8,769 N2,276 lbs10,118 N2,519 lbs11,197 N2,822 lbs12,546 N2,974 lbs13,220 N14.2 ft/lb9.6 m/kgM/R/O/J
3/4 in19 mm0.031 in0.79 mm2,195 lbs9,757 N2,532 lbs11,258 N2,803 lbs12,458 N3,140 lbs13,959 N3,309 lbs14,710 N12.5 ft/lb8.4 m/kgM/R/O/J
3/4 in19 mm0.035 in0.89 mm2,473 lbs10,992 N2,853 lbs12,683 N3,157 lbs14,035 N3,538 lbs15,726 N3,728 lbs16,572 N11.1 ft/lb7.5 m/kgM/R/O/J
1 in25 mm0.031 in0.79 mm2,888 lbs12,838 N3,332 lbs14,813 N3,688 lbs16,393 N4,132 lbs18,368 N4,354 lbs19,355 N9.5 ft/lb6.4 m/kgM/R/J
1 in25 mm0.035 in0.89 mm3,253 lbs14,463 N3,754 lbs16,688 N4,154 lbs18,468 N4,655 lbs20,693 N4,905 lbs21,805 N8.5 ft/lb5.7 m/kgM/R/J
1-1/4 in31.75 (32) mm0.028 in0.71 mm3,296 lbs14,653 N3,803 lbs16,907 N4,209 lbs18,710 N4,716 lbs20,965 N4,970 lbs22,092 N8.5 ft/lb5.7 m/kgM/R/J
1-1/4 in31.75 (32) mm0.031 in0.79 mm3,668 lbs16,304 N4,232 lbs18,812 N4,683 lbs20,818 N5,248 lbs23,327 N5,530 lbs24,581 N7.4 ft/lb5.0 m/kgM/R/J
1-1/4 in31.75 (32) mm0.035 in0.89 mm4,132 lbs18,367 N4,768 lbs21,193 N5,276 lbs23,454 N5,912 lbs26,279 N6,230 lbs27,692 N6.7 ft/lb4.5 m/kgM/R/J
1-1/4 in31.75 (32) mm0.040 in1.00 mm—5,357 lbs23,813 N5,928 lbs26,353 N6,642 lbs29,528 N7,000 lbs31,115 N5.9 ft/lb4.0 m/kgR/J
1-1/4 in31.75 (32) mm0.044 in1.10 mm—5,893 lbs26,194 N6,521 lbs28,988 N7,307 lbs32,480 N7,700 lbs34,227 N5.3 ft/lb3.6 m/kgR/J
2 in50 mm0.047 in1.20 mm————8,400 lbs37,338 N3.1 ft/lb2.1 m/kgR/J

UltiMax High Tensile, High Elongation

WidthThicknessStrengthlbs / NTensile ClassN/mm²ElongationLength / WeightCoil WindingStandard
3/4 in19 mm0.031 in0.79 mm3,377 lbs15,010 N1,000≥ 10%12.5 ft/lb8.4 m/kgR/O/JASTM & EN
1-1/4 in31.75 mm0.031 in0.79 mm5,643 lbs25,083 N1,000≥ 10%7.4 ft/lb5.0 m/kgR/O/J
3/4 in19 mm0.031 in0.79 mm3,039 lbs13,509 N9006.5–12% min12.5 ft/lb8.4 m/kgR/O/J
1-1/4 in31.75 mm0.031 in0.79 mm5,078 lbs22,574 N9006.5–12% min7.4 ft/lb5.0 m/kgR/O/J

Average break strength of one strap. Width tolerance ±0.10 mm. Length / Weight shows how much strap you get per pound or kilogram, so you can work out the footage per coil from the coil weight. Coil winding: M = mini, R = ribbon wound, O = oscillated wound, J = jumbo. A dash means the size is not made in that grade.

ASTM D3953 Finish B and Zinc Coating Grades

Under ASTM D3953, galvanized strap is Finish B, and the zinc coating comes in three grades: Grade 1 (heavy coating), Grade 2 (moderate coating) and Grade 3 (commercial coating). Grades 1 and 2 are often called government-grade galvanized. If your specification names a coating grade, for example “1-1/4 x 0.035 Grade 1 zinc coated steel banding”, send it with your inquiry and we will confirm whether we can meet it before we quote.

Tensile Strength Grades in Galvanized: Regular Duty to High Tensile

Every grade can be supplied galvanized: Terra 650, Ridge 750 and Pivot 830 N/mm² for regular duty steel strapping, Duro 930 and Nexa 980 N/mm² for high tensile steel strapping, and our UltiMax high tensile, high elongation strap at 900 or 1,000 N/mm². All our strap is made from low-carbon steel.

Terra · 650 N/mm² · Regular duty
Ridge · 750 N/mm² · Regular duty
Pivot · 830 N/mm² · Regular duty
Duro · 930 N/mm² · Medium tensile
Nexa · 980 N/mm² · High tensile
UltiMax · 900–1,000 N/mm² · High tensile, high elongation
Coils

Coil Formats: Ribbon, Oscillated, Jumbo & Mini

Galvanized steel strapping comes in the same four coil formats as the rest of our range. Match the format to your tool and dispenser.

Ribbon wound coils of galvanized steel strapping
25–50 kg

Ribbon Wound (RW) Coils

25 to 50 kg per coil, inside diameters of 200, 300 or 406 mm, for manual tools and semi-automatic tools. About 1,000 kg per pallet.

Oscillated wound coil of zinc coated steel strapping on a pallet in the JUHONG warehouse
40–50 kg

Oscillated Wound (OW) Coils

40 to 50 kg on a 406 mm inside diameter, for pneumatic tools, long shifts and automatic strapping. Needs an oscillated-coil dispenser. 12 to 18 coils per pallet.

Jumbo coil of galvanized steel strapping for automatic strapping lines
170–1,000 kg

Jumbo Coils

170 to 1,000 kg on 406 or 610 mm inside diameters, for automatic strapping lines. Most jumbo coils are 32 mm wide. Heavy coils reduce coil changes and make packing faster.

Mini coil of galvanized steel strap
Under 25 kg

Mini Coils

Under 25 kg and easy to handle, for small orders, field work and trials.

How We Make It

Manufacturing: How We Slit and Wax Hot-Dip Galvanized Strapping

On our line in Changzhou, hot-dip galvanized steel coil is slit to strap width and the edges are smoothed to remove burrs. The strap is then waxed, dried, air-cooled and rewound, and packed for shipping.

01
Galvanized Coil

Hot-dip galvanized steel coil

02
Slitting

Slitting · Edge smoothing to remove burrs

03
Waxing

Waxing · Drying · Air cooling

04
Rewinding & Packing

Rewinding · Packing in anti-rust paper

Tensile and Elongation Tests

Break strength and elongation set one grade apart from the next. SGS has tested our steel strapping to GB/T 25820 and EN 13246, and the reports are on our Downloads page. For orders bound for North America, we can test to ASTM D3953 on request.

650–1,000N/mm²
Tensile strength range of our galvanized steel strapping, from regular duty to high tensile, high elongation strap.

In-Line Checks Every Two Hours

Every two hours, inspectors take 10 coils from the line and check width, thickness, tensile strength and bend performance. A failed bend or tensile result stops the line.

Applications

Galvanized Steel Strapping Applications by Industry: Lumber, Steel Pipe & Wire Coils

Buyers across the steel, metals and building materials industries use galvanized steel strapping wherever a strapped bundle will be exposed to weather. Steel mills and pipe makers use it on galvanized coils, structural steel, rebar, square tubes and ductile iron pipe stored in open yards or shipped through humid ports, and on galvanized products, where rust stains from the strap would mark the product. Non-ferrous metal plants use it on copper cathodes, metal ingots and wire rod coils.

Lumber yards, brick and paver plants and building supply yards use it on loads that wait outdoors before sale, and it is also used on open-top railcars, flatbed trucks and export cargo that crosses the sea. For more strapping applications, see our steel strapping page.

Galvanized steel coils
Galvanized structural steel
Galvanized steel sections
Ductile iron pipes
Square steel tubes
Rebar bundles
Wire rod coils
Copper cathodes
Metal ingots
JUHONG worker lining a steel strapping coil pallet with wax paper for sea shipment
Export Packing

How We Pack Galvanized Steel Strapping Coils for Export

Galvanized strap still needs careful packing for shipping. Zinc that stays wet with no air flow, such as coils sweating inside a container, can form white rust, a white powder on the surface. Every coil is wrapped in anti-rust paper as standard, and every sea-freight order gets VCI anti-rust film. Each pallet also gets a rust-preventive desiccant and an outer layer of moisture-resistant wax paper, held with four straps on a sturdy fumigation-free wooden pallet or a steel pallet. Tell us how you want your coils labeled, and we will confirm what we can supply under your brand. Ask for a container loading plan with your quotation.

Blue steel strapping coil standing on a plastic sheet before export packing
01

Coils on the Pallet

Coils are stacked on a fumigation-free wooden pallet or a steel pallet.

Steel strapping coils each wrapped in paper and tape for export
02

Individual Packing

Each coil is wrapped on its own in anti-rust paper.

Desiccant bag placed inside the wrapping of a steel strapping coil
03

Desiccant

A metal rust-preventive desiccant goes inside each pallet.

Steel strapping coils wrapped in clear anti-rust film in the warehouse
04

VCI Plastic Film

The coils are enveloped in VCI anti-rust film, standard for sea freight.

Steel strapping coil covered in brown moisture-resistant wax paper and held with four straps
05

Humidity-Proof Wax Paper

Moisture-resistant wax paper covers the outside, with four straps for reinforcement.

Forklift loading packed steel strapping coils into a container
06

Delivery

Packed pallets are loaded into the container by forklift.

Ordering

What to Put on Your Purchase Order

Send these details and you will get an exact quote and the right strap.

01

Width and thickness, in inches or millimeters

02

Grade or required break strength

03

Finish: hot-dip galvanized and waxed (cold galvanized on request), plus the coating grade if your spec names one

04

Coil format and inside diameter: RW, OW, jumbo or mini

05

Coil weight and quantity

06

Packing: anti-rust paper, plus VCI film for sea freight

07

Coil labels are customizable: our label, or your brand (we confirm what we can supply)

08

Seal type and size, or your tool model

09

Destination port, and whether you want samples first

Seals & Tools

Strapping Seals and Tools for Galvanized Steel Strap

Seal width matches the width of the strapping band, and the seal style follows your tool: push type, snap-on, thread-on or open seals for manual sealers, and magazine seals for machines. We make seals in two finishes, galvanized and plain cold-rolled. For loads that stand outdoors, use galvanized seals with galvanized strap, so the joint does not rust before the strap does. We can ship strapping seals in the same container as the strap. Send us your tool model and we will confirm the strap and seals that fit, and we can also supply manual and pneumatic tensioners and sealers to match.

Cutting tensioned strap is the main risk to safe handling. The strap can spring back when cut and its edges are sharp. To cut it safely, use a proper strap cutter, stand to one side, and wear protective gloves and safety glasses when you handle steel strap.

Range of JUHONG steel strapping seals, from open seals to magazine seals
For Distributors & End Users

Switching Suppliers? Match the Galvanized Strap You Use Now

Whether you resell strap or run it on your own packing line, send a photo of your current coil label or spec sheet. We will match width, thickness, grade, finish and coil format, and send samples to test in your own tools and equipment. Distributors and importers can combine galvanized strap with the rest of our full line of strapping products, including seals, PET strapping and stretch film, in one container. Minimum quantities and lead time depend on size, grade and volume, so we confirm them with your quote.

FAQ

Galvanized Steel Strapping FAQ

Short answers to the questions buyers ask us about galvanized strap.

Often, but not always. Galvanized strap has a metal zinc layer applied by hot dipping or electro-galvanizing. Some strap sold as “zinc coated” has a zinc-rich coating instead. We make both: hot-dip galvanized and waxed strap as standard, and cold galvanized (zinc coated) strap on request.

Hot-dip as standard. We slit it from hot-dip galvanized steel coil, so the zinc is a metal layer bonded to the steel, and then we wax it. Cold galvanized strap, coated with zinc and waxed after slitting, is made on request: contact us if you need it.

Look at the surface and the edges. Hot-dip galvanized strap shows zinc spangle, the crystal pattern that forms as molten zinc cools, and its slit edges are waxed rather than zinc coated. Cold galvanized strap has a smooth gray finish with no spangle, and the zinc covers the edges too.

It resists rust far longer than painted or blue strap, even outdoors and near the coast, because the zinc corrodes first and protects the steel. Kept wet with no air flow, zinc can form white rust, so store coils dry before use.

Galvanized strap falls under ASTM D3953 Finish B. Send us your size and the coating grade your spec calls for, and we will confirm whether we can meet it before we quote. We can also test to ASTM D3953 on request.

Choose black painted strap for container shipments that go into a warehouse on arrival. Choose galvanized strap when the load will stand outdoors, in a coastal yard or on an open vehicle for weeks or months. Both come in the same sizes and grades.

The wax lubricates the strap so it slides and tensions smoothly in friction-type tensioners, and it adds a little protection to the zinc in storage.

Yes. Every size from 1/2 in to 2 in wide comes galvanized, including 3/4 in x 0.031 in and 1-1/4 in x 0.035 in or 0.044 in, from regular duty to high tensile and UltiMax.

Galvanized seals of the same width. For outdoor loads they maintain the same rust resistance at the joint as on the strap. Tell us your tool and we will match the seal style.

In a dry, ventilated warehouse, in the original wrapping and off the floor. To avoid white rust, do not leave wet coils packed tightly together.

Get a Quote

Get a Galvanized Steel Strapping Price Quote

Send us your size, grade, coating grade if you have one, coil format, quantity and destination port, or a photo of your current coil label. We will reply with a price, matching seals and a sample plan.

What to send us

Request a Quotation

Fields marked * are required. You can attach your coil label or specification sheet.

Describe Yourself
Drag & Drop Files, Choose Files to Upload