Steel Coil Packaging and Strapping Supplies for the Steel Industry
Steel mills, metal processing companies, pipe makers and steel traders buy their banding from us by the container. We make steel strapping, steel seals, PET strapping and stretch film in one plant in Changzhou, China. Our bands go on hot rolled coils, cold rolled coils, slit coils, sheet packs, pipes, bars, wire rod and sections. Tell us what you pack and what you use today, and we will match it.
Who We Supply in the Steel Industry

Steel mills and rolling mills
Hot and cold rolled coils are banded on automatic lines, so the band has to feed the heads without jams.
- Jumbo coils
- Magazine seals

Coil processors and service centers
Slitting and cut to length plants strap coils and sheet packs many times a day with hand and pneumatic tools.
- 32 mm steel band
- Push seals

Pipe and tube mills
Pipe bundles have to stay tight through lifting, stacking and sea freight, so mills strap them with steel or PET.
- Steel band
- PET strapping

Steel traders and exporters
A trader ships coils, pipe and bar from several mills and wants one order and one container.
- Bands
- Seals
- Stretch film
The Steel Coil Packaging Process: Wrapping, Protection and Banding
Steel coil packaging protects the coil from the end of the mill line until the customer unwinds it. The packaging procedures differ between coil products, but a typical coil packing sequence runs in this order:
Coil handling
The coil leaves the rolling mill, slitting line or cut to length line by conveyor or crane and is set in position at the packaging station.
Coil wrapping
Many mills wrap the coil in a packing material such as paper, protective film or VCI paper, with overlapping layers that form a protective layer around the coil. A wrapping machine handles this on automated lines; smaller plants still use manual wrapping. The wrapping process keeps coils from moisture, and a vapor corrosion inhibitor slows corrosion during storage and sea freight.
Edge and eye protection
Edge protectors and inner diameter and outer diameter rings protect the coil edges from the strapping and from forklift and crane damage.
Banding
Steel bands go around the coil and through the eye, so the coil stays tight and does not telescope.
Labeling and coil loading
The coil is labeled with its material grade, coil dimensions and weight, then moved by forklift or crane for loading and unloading.

Orange: steel bands. Dark blocks: seals. Band count and position follow each mill’s steel coil packaging standard.
Our part is step 4
Our part of the entire process is step 4: steel and PET bands and the seals that close them. The wrapping machinery and wrapping materials are chosen as part of your wider steel coil packaging operations.
When a band fails, the coil goes back to the station for costly rework, and coil damage in transit becomes a claim. Bands that hold keep coil integrity and product protection consistent across different coil sizes and coil specifications.
Packaging and Banding by Rolled Steel Product
Each mill sets its own steel coil packaging requirements, so the sizes below are the ones our customers use most. Send us your current specification and we will match the grade, width and thickness.





| Steel product | Steel band we supply | Joint | PET option |
|---|---|---|---|
| Hot rolled coils | 880–980 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals, or magazine seals on automatic heads | Use steel for hot coils |
| Cold-rolled, galvanized and color-coated coils | 880–980 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals, or magazine seals on automatic heads | Some mills use PET on these coils to cut cost |
| Narrow coils from slitting lines | 650–720 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals with manual or pneumatic tools | Ask us about your coil weight |
| Sheet and plate packs | 650–720 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals with manual or pneumatic tools | Ask us about your pack weight |
| Pipes and tubes | 650–720 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals with manual or pneumatic tools | Used on pipe bundles, heat-welded |
| Bars and rebar | 650–720 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals with manual or pneumatic tools | Widely used on bar bundles, heat-welded |
| Wire rod and wire coils | 650–720 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals with manual or pneumatic tools | Used on wire coils, heat-welded |
| Sections and profiles | 650–720 MPa, 32 mm wide, 0.8 / 0.9 / 1.0 mm thick | Push seals with manual or pneumatic tools | Use steel where sharp edges would cut PET |
These are the common specifications. Every company has different requirements, so we adjust the grade, width, thickness and seal to your actual load and equipment.
At 980 MPa, our Nexa grade in 1-1/4 in (32 mm) × 1.0 mm breaks at about 7,000 lbs (31,115 N). Full break strength tables for every size are on our steel banding page.
Bands for Steel Coil Packaging Line Automation
Plants automate coil packaging for operational efficiency, but a steel coil packaging line only pays if every station keeps running. An automatic head stops if the band is too wide, has a burr on the edge or is wound unevenly. Every stop means downtime for the coils behind it on the conveyor. We make bands for these lines to tight limits:


- Burr-free edges. The edge is smoothed after slitting, before the bluing heat treatment.
- Magazine seals that stack into the magazine of the sealing head.
Inspectors take 10 coils from our line every two hours and check width, thickness, tensile strength and bend performance. A failed tensile or bend test stops the line, and we scrap the last two hours of output. If you are changing supplier, send us the label of the band you use now and we will match it.
Steel or PET Strapping for Steel Products
Many of our steel industry customers have replaced part of their steel bands with PET to lower their packaging cost.
Where PET works
Bar and rebar producers use a lot of PET, and some coil producers use it on cold-rolled coils as well. PET is joined with a heat-welded joint (friction weld or heat seal), so it needs no seals. It does not rust or leave rust marks on the product, and it is lighter and safer to cut.



PET is not right for every steel product. Keep steel bands for:
- Hot coils and other products that are still hot when they are strapped.
- Sharp-edged sections where edge protection cannot be fitted.
- Loads where a carrier or loading rule calls for steel.
We make PET bands from 9 to 32 mm wide. In 32 mm, our best-selling thicknesses are 1.0 and 1.2 mm. Machine coils go up to 1,000 kg for automatic lines.
See our PET strapping page and our guide on how to choose PET strapping. Not sure which to use? Send us a photo of your bundle and its weight, and we will tell you whether PET will hold it.
Steel Seals for Coil and Bundle Banding
Steel bands in the steel industry are closed with steel seals. We make about 300 million seals a year, and JUHONG is one of the drafting organizations of GB/T 39040-2020, China’s national standard for steel seals and edge protectors for packing.

Push seals (closed seals)
Push seals slide onto the band before tensioning and are closed with a push-type manual or pneumatic tool. They are the usual choice for manual packaging of coils and bundles.

Magazine seals
Magazine seals have outward flanges so they nest in a stack. They feed the sealing head of automatic banding machines. We send free samples so you can test them on your machine.
National standard for steel seals and edge protectors for packing. JUHONG is one of its drafting organizations.
A distributor in Saudi Arabia has bought our magazine seals for years and supplies them to mills in the region.
Push seals and magazine seals are the two types steel customers use most, but they are not the only ones in use. We make other seal types as well.
See all sizes on our strapping seals and magazine seals pages, and the matching tools on our strapping tools page.
Steel Products We Supply Bands For
Flat products
- Hot rolled coil and plate
- Cold rolled and pickled coil
- Galvanized coil
- Color-coated coil
- Tinplate
- Stainless steel sheet
- Cut sheets from service centers
Pipe and tube
- Seamless pipe
- Oil country pipe
- Galvanized pipe
Wire and strand
- Wire rod
- PC strand
- Steel cord
- Cold heading wire
- Galvanized wire
- Stainless steel wire
Long products and others
- Bars
- Rebar
- Sections
- Elevator guide rails
- Transmission tower parts
- Graphite electrodes
For aluminum ingots, copper cathodes and other non-ferrous products, see the applications on our steel strapping page.
Tested to EN 13246, GB/T 25820 and AAR
Each order ships with an inspection report. More about our checks is on our quality control page.
EN 13246 and GB/T 25820
Our steel strapping is tested by SGS to EN 13246 and GB/T 25820. First pages of the reports are on our Downloads page, and we send full reports on request.
ISO 9001:2015
Our quality management system is certified to ISO 9001:2015.
AAR ID 124
Our 3/4 × 0.031 in and 1-1/4 × 0.031 in high tensile bands with notch-type joints are verified under the AAR Open Top Loading Rules (AAR ID 124). See AAR approved strapping.
One Container of Industrial Packaging: Bands, Seals and Film
Steel buyers often need more than one packaging product. We make all four in our own plant:

You can fill one container with steel bands for your coils, seals for your tools, PET for your bar bundles and stretch film for wrapping sheet packs and spare parts. We have shipped to customers in the USA, Canada, Mexico, the UK, Germany, France, Poland, Spain, Australia, Brazil, Chile, Saudi Arabia and the UAE.
Steel Coil Packaging and Coil Wrapping: Frequently Asked Questions
What steel band is used for steel coils?
Our customers most often use 32 mm wide bands, 0.8, 0.9 or 1.0 mm thick, at 880–980 MPa for hot and cold rolled coils. Slitting and processing plants often use 650–720 MPa in the same sizes. Every mill sets its own specification, so send us yours and we will match it.
How are steel coils packaged for shipping?
Most coils are wrapped against moisture and corrosion, fitted with edge protection, banded around the coil and through the eye, then labeled. Steel coil packaging standards differ by mill, customer and route. We supply the bands and seals for that part of handling and packaging.
Can PET strapping replace steel strapping on steel products?
Often, yes. Many bar and rebar producers use PET, and some mills use it on cold rolled coils, pipe and wire coils to lower packaging cost. Keep steel for hot products and for sharp edges that would cut plastic bands.
Which seals do you use for steel coil strapping?
Push (closed) seals for manual and pneumatic tools, and magazine seals for automatic strapping machines. These two are the most common, and we make other seal types too. PET is heat-welded and needs no seals.
Do you supply jumbo coils for automatic coil strapping machines?
Yes. Our jumbo coils weigh 170 to 1,000 kg on a 406 or 610 mm inner diameter. Tell us your machine and we will match the core and coil width.
Can you match the band we buy now?
Yes. Send us the coil label or specification sheet of your current band, with the tool or machine it runs on. We match the grade, size, finish and coil format. For magazine seals, we send free samples to test on your machine.
Which countries do you ship to?
We ship to the USA, Canada, Mexico, the UK, Germany, France, Poland, Spain, Australia, Brazil, Chile, Saudi Arabia and the UAE, along with other markets.
Tell Us What You Pack
Send us the steel product, coil weight or bundle weight, your current band size and a photo of the load. We will reply with a recommended band, seal and coil format, and a container plan.
What to send us
- The steel product
- Coil weight or bundle weight
- Your current band size
- A photo of the load