Products · PP Strapping

PP Strapping: Polypropylene Plastic Strapping Rolls for Cartons and Light Pallets

JUHONG supplies PP strapping, also called polypropylene strapping or poly strapping, for carton closing, bundling and light pallet loads. The plastic strapping we supply runs from 5 mm to 18 mm wide, in hand and machine grades, with single-strap break strengths from 50 kg to 240 kg (110–529 lbf). Rolls come in many colors, plain or printed with your logo, and we take OEM/ODM orders. For light-duty packaging it is a low cost strapping solution.

Red, yellow, dark blue and light blue PP strapping rolls on paper cores
5–18 mm
Hand and machine grade
50–240 kg
Break strength per strap
OEM/ODM
Custom colors and printing

Trusted by Global Industrial Buyers

At a Glance

PP Strapping at a Glance

5–18 mm

Strap widths we supply

50–240 kg

Break strength per strap (110–529 lbf)

1,250–7,000

Meters of strap per roll

200 mm

Paper core inside diameter

PP Strapping: At-a-Glance

JUHONG
Width5–18 mm, 26 models in 8 nominal sizes
Thickness0.25–1.00 mm
Break strength50–240 kg (110–529 lbf) per strap
ElongationBelow 20% at break
Roll1,250–7,000 m per roll, 6–10 kg net, 200 mm paper core
GradesHand grade and machine grade
ColorsMany colors, plain or custom printed
OEM/ODMAccepted
MOQ300 rolls
Products

PP Strapping Band Products We Supply: Hand, Machine and Printed Strap

We supply three kinds of polypropylene strap. All three come from the same size range and share the same 200 mm paper core, so both grades can go in one shipment.

01
Blue hand grade PP strapping roll on a paper core
HAND GRADE

Hand Grade PP Strapping

Tensioners
Battery tools

Hand grade PP strapping is for manual tensioners and sealers, battery welding tools and buckle joints. The wider, thicker sizes give you heavy duty hand grade polypropylene for bundles and light pallets. Tell us which tool you use and we will match the strap size to it.

02
Yellow machine grade PP strapping roll on a paper core
MACHINE GRADE

Machine Grade PP Strapping

Semi-automatic
Automatic

Machine grade polypropylene strapping is made for semi-automatic and automatic strapping machines. The strap has to feed around the arch and tension cycle after cycle, so curvature (camber) and width tolerance matter as much as strength. The PP strap we supply keeps elongation below 20% and limits camber to under 30–60 mm per meter, depending on size. Most carton strapping machines take strap between 5 mm and 12 mm wide; check what your machine is set for.

03
PP strap in purple, green, black, blue, yellow and orange
COLORS AND PRINT

Colored and Custom Printed PP Strap

Many colors
OEM/ODM

Colored strap helps warehouses sort orders, mark lots or tell outbound from returned goods at a glance. We supply PP strapping in many colors and take OEM/ODM orders. Custom printing (OEM) puts your company name, logo or a handling warning along the strap, which also makes tampering easier to spot.

What Is PP

What Is PP Strapping? Plastic Strapping Made from Polypropylene

PP strapping is a plastic strapping band made from polypropylene, the same type of plastic used for many caps and containers. The polymer is extruded into a flat strip and then stretched, so the molecules line up along its length. That stretching is where most of its tensile strength comes from. The result is a light strapping material with good elasticity, and it costs less per meter than polyester (PET) or steel strap.

In North America, “poly strapping” usually means PP, although some buyers use it for PET too. PP and PET strap can look alike on the roll. If you are not sure what your current strap is, send us a sample and we will check whether it is PP or PET before you reorder.

Where PP Strapping Works Well

PP has no sharp edges and does not rust, so staff can handle it easily and it leaves no marks on the goods.

Close-up of white, blue, red, yellow and black polypropylene strap
UseTypical goods
Box strappingClosing and reinforcing corrugated cartons on packing lines
BundlingNewspapers, magazines, flat-packed boxes and textiles
Light palletsLight, stable palletized loads inside a warehouse or on short domestic routes
Warehouse packagingGeneral packing, where a plastic strap is cheaper and safer to handle than steel
PET or Steel

When to Choose Polyester Strapping or Steel Strapping Instead

PP strapping stretches more and slowly loses tension under a constant load. That is fine for boxed goods, but not for heavy products or rigid loads that have to stay tight through a long trip.

  1. PP strapping: boxed goods, bundles and light, stable pallets.
  2. PET strapping: heavy pallets, brick packs, timber and export containers.
  3. Steel: steel coils, metal bundles and loads with sharp edges or high temperatures.

Outdoor Storage

PP is also a poor fit for long outdoor storage, because sunlight weakens it. For loads kept outside, PET strap is the better choice.

Compare PP and PET →

Sizes

PP Strap Sizes, Break Strength and Elongation

The table groups the PP strapping we supply by nominal size. Break strength is the tensile force needed to break one strap, measured on the strap alone.

Width
5–18 mm
Break strength
50–240 kg
Elongation
Below 20%
Blue, black, red, yellow and green PP strapping rolls

PP Strapping by Nominal Size

Eight nominal sizes from 5 mm to 18 mm. Pick the width your machine or tool takes, then the break strength you need.

Nominal sizeActual rangeThicknessBreak strengthRoll lengthWeight per meter
5 mm (≈ 3/16 in)4.5–5.1 mm0.42–0.68 mm50–61 kg (110–134 lbf)5,620–7,000 m1.35–1.6 g
8 mm (≈ 5/16 in)7.5–8.3 mm0.30–0.55 mm60–85 kg (132–187 lbf)4,000 m1.5–2.2 g
9 mm (≈ 3/8 in)8.5–9.3 mm0.50–0.75 mm100–102 kg (220–225 lbf)3,500–3,800 m2.5–2.7 g
11 mm (≈ 7/16 in)10.2–11.3 mm0.25–0.55 mm70–108 kg (154–238 lbf)3,000–5,000 m1.68–3.0 g
12 mm (≈ 1/2 in)11.2–12.3 mm0.50–0.85 mm105–180 kg (231–397 lbf)2,000–3,000 m2.7–5.0 g
13 mm (≈ 1/2 in)12.5–13.3 mm0.60–1.00 mm150–220 kg (331–485 lbf)1,428–2,500 m4.0–7.0 g
15 mm (≈ 5/8 in)14.2–15.3 mm0.55–0.85 mm150–240 kg (331–529 lbf)1,330–2,500 m4.0–7.5 g
18 mm (≈ 0.7 in)17.5–18.3 mm0.75–0.85 mm240 kg (529 lbf)1,250 m8.0 g

Some US catalogs list 1/2 in poly strap at around 300 lbs break strength. Our 12 mm and 13 mm sizes run from 231 lbf to 485 lbf, so the same width comes in a lighter or a high strength version. Heavy duty 1/2 in hand grade strap is sometimes rated at 600 lbs. Our strongest PP sizes, 15 mm and 18 mm, break at 240 kg (529 lbf); past that point the load needs a high tensile strap such as PET. At the light end, the 5 mm sizes break at 110–134 lbf.

Models
26
Roll length
1,250–7,000 m
Net roll weight
6–10 kg
PP strap color options, including custom printing with a logo

Full Model List (26 Sizes)

All sizes: elongation at break below 20%, paper core 200 mm inside diameter × 188 mm wide.

PP strapping brochure with the full spec table (PDF, 1.4 MB)

ModelWidth (mm)Thickness (mm)g/mNet / gross roll weight (kg)Length (m)Break strength (kg)Camber
05045-6000-13.54.5–5.10.42–0.521.358.1 / 8.66,00050< 60 mm/1 m
05047-7000-144.5–5.10.42–0.521.49.8 / 10.37,00056< 60 mm/1 m
05055-6000-154.5–5.10.55–0.651.59 / 9.56,00060< 60 mm/1 m
0506-16-9KG4.5–5.10.58–0.681.69 / 9.55,62061< 60 mm/1 m
08035-4000-157.5–8.30.30–0.401.56 / 6.54,00060< 50 mm/1 m
08045-4000-187.5–8.30.40–0.501.87.2 / 7.74,00075< 50 mm/1 m
08045-4000-207.5–8.30.40–0.502.08 / 8.54,00080< 50 mm/1 m
0805-4000-227.5–8.30.45–0.552.28.8 / 9.34,00085< 50 mm/1 m
09055-3800-258.5–9.30.50–0.602.59.5 / 103,800100< 40 mm/1 m
0907-3500-278.5–9.30.65–0.752.79.5 / 103,500102< 40 mm/1 m
11025-5000-16.810.2–11.00.25–0.351.688.4 / 8.95,00070< 40 mm/1 m
11035-3000-2010.5–11.30.30–0.402.06 / 6.53,00075< 40 mm/1 m
11045UP-3000-2210.5–11.30.40–0.502.26.6 / 7.13,00080< 40 mm/1 m
11045-3000-2510.5–11.30.43–0.532.57.5 / 83,00090< 40 mm/1 m
1105-3000-3010.5–11.30.45–0.553.09 / 9.53,000108< 40 mm/1 m
1206UP-3000-2711.2–12.00.50–0.602.78.1 / 8.63,000105< 40 mm/1 m
1206-3000-3111.5–12.30.55–0.653.19.3 / 9.83,000122< 30 mm/1 m
12063-3000-3311.5–12.30.58–0.683.39.9 / 10.43,000132< 30 mm/1 m
12068-2500-4011.5–12.30.63–0.734.010 / 10.52,500150< 30 mm/1 m
1208-2000-5011.5–12.30.75–0.855.010 / 10.52,000180< 30 mm/1 m
13065-2500-4012.5–13.30.60–0.704.010 / 10.52,500150< 30 mm/1 m
1307-2000-5012.5–13.30.65–0.755.010 / 10.52,000180< 30 mm/1 m
13095-7012.5–13.30.90–1.007.010 / 10.51,428220< 30 mm/1 m
1506-2500-4014.2–15.00.55–0.654.010 / 10.52,500150< 30 mm/1 m
1508-7514.5–15.30.75–0.857.510 / 10.51,330240< 30 mm/1 m
1808-1250-8017.5–18.30.75–0.858.010 / 10.51,250240< 30 mm/1 m
Weight per meter
±0.1 g
Roll weight
+0.2 / −0.15 kg
Roll length
±1%
Blue hand grade PP strapping roll on a paper core

How to Read the Break Strength Figures

  • The figure is the tensile strength of one strap, not of the joint. A heat-sealed, welded or buckled joint is weaker than the strap, and how much weaker depends on your strapping machine or tool settings.
  • Width, thickness, elongation and camber are checked against Chinese national standards for plastic strapping.
  • Weight per meter is held to ±0.1 g, averaged over a 5 m sample.
  • Roll weight is held to +0.2 / −0.15 kg, averaged over 10 random rolls.
  • Roll length is held to ±1%, so a 3,000 m roll measures 2,970–3,030 m.

Which Strap Width for Which Job?

Start from break strength and from what your machine or tool accepts, then pick the size. As a rough guide:

  • 5 mm: light boxes and parcels on automatic machines.
  • 8–9 mm: boxes, folded cases and small bundles.
  • 11–13 mm: heavier cartons, bundles and light pallets. Both 12mm and 13 mm strap get sold as 1/2 in; 13 mm is the closer match.
  • 15–18 mm: the strongest PP sizes, for the heaviest loads PP is used on.

If you already run a machine, check the strap size its guide is set for before you change.

Running a strapping machine? Tell us the make and model and we will match the strap to it.
Rolls and Cores

PP Strapping Rolls for Packaging Lines: Cores, Coil Weight and Length

Every PP strapping roll we supply is wound on a paper core 200 mm (about 7.9 in) in diameter and 188 mm wide. Net roll weight runs from 6 kg to 10 kg, and roll length from 1,250 m to 7,000 m depending on the size. Thinner strap puts more meters on each coil, which means fewer coil changes on a busy line.

Many rolls sold in the US come on a 16 x 6 core (16 in, or 406 mm, across). Our 200 mm core is different, so before ordering a new strapping roll for an existing machine or dispenser, check the core diameter its coil holder takes. Our strapping dispensers include carts for plastic strap coils.

Core inside diameter200 mm (about 7.9 in)
Core width188 mm
Net roll weight6 kg to 10 kg
Roll length1,250 m to 7,000 m
Common US core16 x 6 (16 in, or 406 mm, across): check your coil holder
PP strapping rolls wrapped in kraft paper and stacked on a pallet
PP vs PET

PP Strap vs PET Strap: Strength, Tension Retention and Strapping Cost

The PP vs PET strapping choice comes down to load, distance and how long the strap must stay tight. Polypropylene strapping and polyester strapping are used side by side in most warehouses, each for its own kind of load, and the right mix gives better cost efficiency than using one strap for everything.

01
Cost per load

One PET Strap or Two PP Straps

One PET strap can sometimes replace two PP straps on the same load, so the cheaper strap does not always give the lower cost per load.

Strap count
Cost per load
02
Tension

Straps Going Slack in Transit

If your loads lean or your straps go slack in transit, compare the two on a few test loads.

Leaning loads
Test loads
03
Same tools

An Easy Side-by-Side Trial

A polypropylene and polyester strap of the same size can also share the same tools, which makes a side-by-side trial easy.

Tensioners
Seals
Compared

PP Strapping and PET Strapping Side by Side

See our PET strapping range for PET strapping band sizes.

PP strappingPET strapping
MaterialPolypropylenePolyester
ElongationHigher (below 20% at break for the PP we supply)Lower
Tension retentionWill lose tension over time under a constant loadHolds tension much better
Outdoor useWeakened by UV lightBetter weather resistance
Typical loadsCartons, bundles, light palletsHeavy pallets, brick packs, timber, metals
Cost per meterLowerHigher
JointsHeat seal, friction weld, metal seals, bucklesFriction-welded and heat-sealed joints, metal seals, buckles
Tools and Seals

Strapping Tools, Tensioners, Seals and Buckles for PP and PET Strap

The PP strap we supply works with the same strapping tools you would use for PET. A manual tensioner and serrated clip can be used on either material, as long as the tool matches the strap width.

Manual PET and PP strapping tensioner and sealer

Manual

Tensioners and sealers

Manual tensioners and sealers, used with metal clips.

Battery powered strapping tool for PET and PP strap

Powered

Friction-weld tools

Battery and pneumatic tools weld the strap to itself.

Galvanized wire buckle for PP and cord strapping

Buckles

Wire buckles

Wire buckles for joints made by hand.

Two serrated strapping seals with dotted and slotted teeth for PET and PP strapping

Seals

Serrated seals

Serrated seals grip the smooth surface of plastic strap.

Tools and Joints for PP Strap

For a strapping machine, tell us the make and model and we will match the strap to it.

Tool or partJoint
Manual tensioner and sealerMetal clip crimped over the strap
Battery or pneumatic toolFriction weld, no seal needed
Wire buckleBuckle joint made by hand
Serrated sealSeal that grips smooth plastic strap

We also supply strapping tools and dispensers and wire buckles and seals, so the strap, joint and tool can be checked together before shipping.

Manual PP and PET Tools Catalog

Tensioners and sealers for PP and PET strap, with the strap width and thickness each model takes, are in our manual tools catalog.

FAQ

PP Strapping FAQ, Including Whether PP Strap Is Recyclable

Short answers to the questions buyers ask us about PP strapping.

Closing boxes, holding a bundle together, reinforcement of corrugated cases and keeping light, stable loads in place. It is the usual choice for packing lines that strap boxes, printed matter, textiles and similar goods.

Hand grade PP strap is for manual and battery tools. The machine version is made to tighter width and camber limits so it feeds smoothly through the arch of a semi-automatic or automatic strapping machine.

The PP strapping we supply breaks at 50 kg to 240 kg per strap (110–529 lbf), depending on size. Joint strength is lower than strap strength and depends on how the joint is made.

No. Size for size, PET strap is stronger and holds tension much longer than PP strap. PP is the economical choice for light loads; PET is the high-strength choice for heavy or long-distance loads.

200 mm inside diameter and 188 mm wide. Check that your machine or dispenser takes this core before ordering.

Many colors are available, and we take OEM/ODM orders. Custom printing with your logo or text is available.

Only for short periods. Sunlight breaks polypropylene down, so for loads kept outside PET strap is the better choice.

Yes. Polypropylene is a widely recycled plastic (resin code 5). Clean, used PP strap can go to a recycler that takes polypropylene, though recycling collection depends on the programs in your area. If sustainable packaging is part of your brief, tell us and we will discuss the options.

They can look alike. PET is usually stiffer and stretches less. The simplest way is to send us a sample; we will check it and tell you which material you are using.

Get a Quote

Ordering PP Strap for Your Strapping Needs

JUHONG is a strapping company: we make steel strapping, PET strapping, stretch film and strapping seals, and we supply PP strapping alongside them. To quote PP strapping for your packaging needs, we need:

  1. Width and thickness, or the model from the table above
  2. The grade, and your machine or tool model
  3. Required break strength
  4. Color, and print text if you want custom printing
  5. Core size, if your holder does not take a 200 mm core
  6. Monthly or yearly quantity
  7. Destination port

PP strapping can go in the same container as our steel and PET strap and stretch film, which keeps freight down on a mixed shipment. Samples are available for checking on your own line. Contact us with your requirements and we will reply with sizes and a quote.

To quote, we need
Request a Quotation

Fields marked * are required. You can attach a photo of your current strap, roll label or machine.

Describe Yourself
Drag & Drop Files, Choose Files to Upload